809.00AEDOriginal price was: 809.00AED.769.00AEDCurrent price is: 769.00AED. VAT Excl.
Key Features
96Wh / 6.6Ah capacity
Compatible with Sony U-type mount cameras FS5, FS7, PMW series camcorder, and more.
Features D-Tap Advanced, D-Tap, and USB outputs.
D-Tap Advanced port can also be used to charge the battery using the VL-DT1 D-Tap charger.
4 Power Indicator LEDs
Protected from over-charge, over-discharge, and over-currents at high loads
Environmentally friendly and can be recycled
* May not be compatible with all Sony chargers
This 96Wh IDX 14.4V Li-Ion Battery for Sony BP-U Mount Cameras provides power for your Sony FS7, FS5, and PMW-series cameras. It incorporates a USB port and D-Tap Advanced power port which can be used for powering your accessories. A four-LED gauge indicates the charge state of your battery. The battery's internal circuitry provides over-charge, over-discharge, and high load overcurrent protection.
This battery is compatible with and powers Sony FS5, FS7, and PMW-series cameras.
It incorporates a USB port, D-Tap port, and D-Tap Advanced power port which can be used for powering your accessories.
The D-Tap Advanced port is compatible with D-Tap plugs for power output. However, with a compatible charger (not included), you can charge the battery via the D-Tap Advanced port.
Charging your battery via the standard D-Tap is not recommended.
The USB output port is not a data port and is only for power. It provides 5V at 2.3A. It is an A-type connector and becomes active when you push and hold the CHECK/USB ON button for longer than three seconds. It will turn off once the cable has been removed or no power has been drawn for more than 30 minutes.
The VL-2 is a two-channel, sequential Li-Ion (Lithium-Ion) fast charger with a built-in 60W power supply. Up to two Li-Ion Endura V-mount batteries can be charged in 5 hours.
Portability
The VL-2 offers a lightweight design (3.3lbs) with a convenient built-in handle.
V-Mount
The highly reliable V-Mount, battery mount is becoming more and more prevalent on many new broadcast and professional camcorders. In response, IDX has adapted the design of their batteries and chargers to with the V-Mount design.
Condition Indicator
An LED condition indicator is offers a quick glance of each batteries charge status.
Battery Chemistries
The optional A-E2NP allows the VL-2 to charge NP style batteries of any one of the following chemistries:
Li-Ion (Lithium Ion)
NiCd (Nickel Cadmium)
NiMH (Nickel Metal Hydride)
Power Supply
A standard 4-Pin Canon type connector is available on the front panel for 60 watts of DC power.
Red (charging)
Green (complete/trickle)
Orange (battery fault)
World-Wide AC Power
As with all IDX chargers, the VL-2's power switch is recessed to prevent an accidental loss of power. A world-wide, auto-sensing AC power (AC 100-240V) operation is standard.
The VL-4X 4-Channel V-Mount Charger with Power Supply from IDX supports lithium-ion V-mount batteries and features sequential charging for four batteries, automatically switching to the second battery after fully charging the first, and it features simultaneous charging for two batteries when on opposite sides. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design.
This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. It features a support stand to keep the charger upright on a flat surface.
Note:Power Base (DC output) mode is not supported with the VL-4X.
Charge four lithium-ion V-mount batteries sequentially, or two batteries simultaneously
Provides 2.7A quick-charge maximum
Overvoltage protection circuitry stops charging the batteries when voltage exceeds a safe charge level
Protection timer recovery charge mode is approximately two hours; a quick charge timer is approximately 5 to 12 hours
Power your professional V-mount cameras such as the RED WEAPON or ARRI ALEXA Mini along with other professional devices with this DUO-C150P 145Wh High-Load Li-Ion V-Mount Battery from IDX System Technology. Featuring a V-mount, the compact battery is only 2.3" thick, but packs a large 145Wh, 9.9Ah capacity, providing 14.5V to your gear with a 14A maximum draw. It is well suited for digital cinema cameras and camera stabilizer systems where long runtimes are required, and its battery data information displays in most cameras' viewfinders.
The DUO-C150P can output power via its V-mount, two D-Tap outputs, and USB Type-C port. One of the D-Tap ports is an Advanced port that can also be used to charge the battery with an optional D-Tap charger such as the UC-PD1. The USB Type-C is also a PD Fast Charging input that allows you to fast-charge the battery using up to 60W.
Designed with battery circuit protection against overcharge, overdischarge, overcurrent, and exposure to high temperatures, it protects your battery from the rigors of production. A 5-LED battery life indicator on its side provides a quick visual indication of the charge state of your battery, and its housing is designed with antimicrobial, antiviral materials.
Key Features
Suitable for cinema camera productions that need a high-capacity battery in a small package
The battery data displays in the viewfinder system of most cameras, and the addition of an SMBus enables RED cameras to display this information as well
V-Torch light for easy attachment to the plate
Handles up to 14A loads
Two unregulated D-Tap accessory outputs at 80W each, one is a D-Tap Advanced input to also charge the battery
USB Type-C output port with 60W PD fast charging input
Battery circuit protection including over-charge, over-discharge, over-current, and over-temperature
5-LED battery life indicator
Fully compatible with all IDX Endura V-mount chargers, as well as the UC-PD1 USB Type-C charger and the VL-DT1 D-Tap charger
Antiviral and antimicrobial body for hygienic peace of mind