JVC SSL-JVC50 7.4V IDX Lithium-Ion Battery for JVC Camcorders
SKU: SSL-JVC50 640.00AED VAT Excl.Key Features
- 4900mAh / 37W capacity
- Manufactured specifically for JVC GY-HM600, GY-HM650, GY-HMQ10, GY-HMQ30, and GY-LS300 camcorders
- Secured communication enables the cameras to accurately read remaining battery capacity in the camera viewfinder
- Built-in protection for over-charge, over-discharge, and over-current
The JVC SSL-JVC50 7.4V IDX Lithium-Ion Battery for JVC Camcorders is a JVC-packaged IDX battery for the GY-HMQ10, HM600, and HM650 JVC camcorders.
JVC IDX Battery for GY-HM600U, GY-HM650U, GY-HMQ10U, DT-X
SKU: SSL-JVC75Key Features
- 7350mAh / 55Wh capacity
- Manufactured specifically for JVC GY-HM600, GY-HM650, GY-HMQ10, GY-HMQ30, and GY-LS300 camcorders
- 7.2V X-Tap power connector for powering camera accessories (C-XTap cable necessary for use)
- Battery circuit protection ensures the SSL-JVC75 is fully protected against common causes of battery misuse, guarding against over charge, over discharge and over load incidences
- Marker Empty/Full Physical sliding switch to indicate battery status
- Built-in protection for over-charge, over-discharge, and over-current
This high-capacity IDX Battery from JVC is designed for the JVC GY-HM600U, GY-HM650U, and GY-HMQ10U cameras and JVC DT-X series monitors. It features a 7.4V output and 55Wh capacity and offers a proprietary IDX 7.2V X-Tap output for powering various accessories simultaneously with the camera/monitor. The optional C-XTAP2 X-Tap open leads cable is required for using the X-Tap connector.
IDX System Technology SL-VBD96 7.2V Li-Ion Battery for Panasonic Cameras (70Wh)
SKU: SL-VBD96 610.00AED VAT Excl.Key Features
- 9600mAh / 70Wh capacity
- Compatible with Panasonic AG-DVX200 series, HC-X1000, AJ-PX series, and the new AU-EVA1.
- USB (Type-A) power output for powering USB devices, smart phones and tablets
- 7.2V X-Tap power connector for powering camera accessories (C-XTap Cable accessory will be necessary for use)
- 4 Power Indicator LEDs
- Protected from over-charge, over-discharge, and over-currents at high loads
- Environmentally friendly and can be recycled
IDX SL-F70 Lithium-Ion Battery Sony L NP-F
SKU: SL-F70 400.00AED VAT Excl.Key Features
- 9900mAh / 72Wh capacity
- Compatible with all equipment and accessories using the Sony L-series battery.
- USB (Type-A) power output for powering USB devices, smart phones and tablets
- 7.2V X-Tap power connector for powering camera accessories (C-XTap Cable accessory will be necessary for use)
- 4 Power Indicator LEDs
- Protected from over-charge, over-discharge, and over-currents at high loads
- Environmentally friendly and can be recycled
- Compatible with most Sony and 3rd-party chargers. (Not compatible: Sony AC-VQ1051D)
IDX SB-U50 PD Sony BP-U Lithium-Ion Battery (14.4V, 48Wh)
SKU: SB-U50 552.00AED VAT Excl.Key Features
- 48Wh / 3.3Ah capacity
- Compatible with Sony U-type mount cameras FS5, FS7, PMW series camcorder, and more.
- Features D-Tap Advanced, and USB outputs.
- D-Tap Advanced port can also be used to charge the battery using the VL-DT1 D-Tap charger.
- 4 Power Indicator LEDs
- Protected from over-charge, over-discharge, and over-currents at high loads
- Environmentally friendly and can be recycled
- May not be compatible with all Sony chargers
IDX System Technology SB-U98 PD Sony BP-U Lithium-Ion Battery (14.4V, 98Wh)
SKU: SB-U98 Original price was: 809.00AED.769.00AEDCurrent price is: 769.00AED. VAT Excl.Key Features
- 96Wh / 6.6Ah capacity
- Compatible with Sony U-type mount cameras FS5, FS7, PMW series camcorder, and more.
- Features D-Tap Advanced, D-Tap, and USB outputs.
- D-Tap Advanced port can also be used to charge the battery using the VL-DT1 D-Tap charger.
- 4 Power Indicator LEDs
- Protected from over-charge, over-discharge, and over-currents at high loads
- Environmentally friendly and can be recycled
- * May not be compatible with all Sony chargers
This 96Wh IDX 14.4V Li-Ion Battery for Sony BP-U Mount Cameras provides power for your Sony FS7, FS5, and PMW-series cameras. It incorporates a USB port and D-Tap Advanced power port which can be used for powering your accessories. A four-LED gauge indicates the charge state of your battery. The battery's internal circuitry provides over-charge, over-discharge, and high load overcurrent protection.
This battery is compatible with and powers Sony FS5, FS7, and PMW-series cameras.
It incorporates a USB port, D-Tap port, and D-Tap Advanced power port which can be used for powering your accessories.
The D-Tap Advanced port is compatible with D-Tap plugs for power output. However, with a compatible charger (not included), you can charge the battery via the D-Tap Advanced port.
Charging your battery via the standard D-Tap is not recommended.
The USB output port is not a data port and is only for power. It provides 5V at 2.3A. It is an A-type connector and becomes active when you push and hold the CHECK/USB ON button for longer than three seconds. It will turn off once the cable has been removed or no power has been drawn for more than 30 minutes.
IDX VL-DT1 D-Tap Advanced Port Battery Charger
SKU: VL-DT1 290.00AED VAT Excl.Key Features
- For Endura Batteries with D-Tap Advanced
- Single-Channel D-Tap Advanced Charger
- 3-Pin Safe Charge Design
- Charger Monitors Cell Status
IDX System Technology VL-2PLUS Endura-type Lithium-Ion Battery Charger, 2-Channel Sequential Charging, with 60-Watt Power Supply
SKU: VL-2PLUS
The VL-2 is a two-channel, sequential Li-Ion (Lithium-Ion) fast charger with a built-in 60W power supply. Up to two Li-Ion Endura V-mount batteries can be charged in 5 hours.
Portability
The VL-2 offers a lightweight design (3.3lbs) with a convenient built-in handle.
V-Mount
The highly reliable V-Mount, battery mount is becoming more and more prevalent on many new broadcast and professional camcorders. In response, IDX has adapted the design of their batteries and chargers to with the V-Mount design.
Condition Indicator
An LED condition indicator is offers a quick glance of each batteries charge status.
Battery Chemistries
The optional A-E2NP allows the VL-2 to charge NP style batteries of any one of the following chemistries:
- Li-Ion (Lithium Ion)
- NiCd (Nickel Cadmium)
- NiMH (Nickel Metal Hydride)
Power Supply
A standard 4-Pin Canon type connector is available on the front panel for 60 watts of DC power.
- Red (charging)
- Green (complete/trickle)
- Orange (battery fault)
World-Wide AC Power
As with all IDX chargers, the VL-2's power switch is recessed to prevent an accidental loss of power. A world-wide, auto-sensing AC power (AC 100-240V) operation is standard.
IDX System Technology VL-4X 4-Channel V-Mount Charger with Power Supply
SKU: VL-4XKey Features
- 4 Sequential and 2 Simultaneous Charging
- Up to 2.7A Quick-Charge Current
- Fanless Design, Overvoltage Protection
- Support Stand
- 100-240V 4-Pin XLR Power Input
- LED Status Indicators
The VL-4X 4-Channel V-Mount Charger with Power Supply from IDX supports lithium-ion V-mount batteries and features sequential charging for four batteries, automatically switching to the second battery after fully charging the first, and it features simultaneous charging for two batteries when on opposite sides. It delivers up to 2.7A of quick-charge current without the noise of a typical charger thanks to a fanless design.
This portable desktop charger is designed with reliable internal safety features that protect both the battery and charger from damage should faulty or misused batteries be placed on the charger. It will automatically stop charging if any attached battery reaches an overvoltage condition. It features a support stand to keep the charger upright on a flat surface.
Note:Power Base (DC output) mode is not supported with the VL-4X.
Charge four lithium-ion V-mount batteries sequentially, or two batteries simultaneously
Provides 2.7A quick-charge maximum
Overvoltage protection circuitry stops charging the batteries when voltage exceeds a safe charge level
Protection timer recovery charge mode is approximately two hours; a quick charge timer is approximately 5 to 12 hours
4-pin XLR 100-240 VAC power adapter included
IDX VL-2X 2-Channel V-Mount Charger & Power Supply
SKU: VL-2X 732.00AED VAT Excl.Key Features
- Fanless, Sequential Charging
- Up to 2.7A Quick-Charge Current
- 4-Pin XLR DC Output
- Overvoltage Protection
- Desktop Feet and Flip-Out Kickstand
- 100-240V Worldwide Power Input
- LED Status Indicators
IDX DUO-C98P 97Wh High-Load Li-Ion V-Mount Battery
SKU: DUO-C98P 916.00AED VAT Excl.Key Features
- 14.5V 97Wh V-Mount Battery
- SMBus Data Info Displays in Viewfinder
- Handles up to 10.5A Loads
- Two 80W D-Tap Accessory Outputs
- D-Tap & USB PD Fast Charging Port
- Battery Circuit Protection
- V-Torch, 5-LED Battery Life Indicator
- Compatible with UC-PD1 & VL-DT1 Chargers
IDX DUO-C198P 193Wh High-Load Li-Ion V-Mount Battery
SKU: DUO-C198P Original price was: 1,470.00AED.1,397.00AEDCurrent price is: 1,397.00AED. VAT Excl.Key Features
- 14.54V 193Wh V-Mount Battery
- SMBus Data Info Displays in Viewfinder
- Handles up to 14A Loads
- Two 80W D-Tap Accessory Outputs
- D-Tap & USB PD Fast Charging Port
- Battery Circuit Protection
- V-Torch 5-LED Battery Life Indicator
- Compatible with UC-PD1 & VL-DT1 Chargers
